t_seriest

Technical Specifications

Dimensions

Head Dia.
1.3 inches (33 mm)
Body Dia.
1 inches (25.4 mm)
Length
5.9 inches (149 mm)1
Weight
4.6 ounces (130 grams)
w/o battery
6.3 ounces (180 grams)
w/ battery

Battery Type

  • 1x18650 or 2xCR123A or 2x18650 (optional)2
  • Compatible battery (diameter/length)
    • 123A: (16-16.8mm/34-34.5mm)
    • 18650: (18-18.8mm/65-68.8mm)
  • Protection PCB trip current: 8A or higher
  • Read precaution with li-ion batteries.

Operating voltage

  • 2.7V - 8.4V
  • All batteries are connected in series. Do not exceed 8.4V.

What's included

  • T25L-R flashlight
  • Spare o-rings
  • User Manual
  • Mil-Spec Para-cord Lanyard w/ quick attachment clip
  • Removeable darken pocket clip made of spring steel w/ harden treatment
  • Type-C (bi-direction insert) USB charging cable (3.3feet/1meter) w/ AWG24 copper wire

Two models

  • Base
    • Smooth aluminum black bezel
    • EAGTAC 18650 2600mAh li-ion battery (8A High discharge protection pcb built-in at anode)
  • Kit
    • Crenulated aluminum black bezel
    • EAGTAC 18650 3500mAh li-ion battery (8A High discharge protection pcb built-in at anode) authentic Sanyo GA cell
    • Add-on diffuser filter with flip-cover feature
    • Heavy duty nylon holster
    • (US) UL certified 5V 1A USB charger
    • (EU) TUV/GS/CE certified 5V 1A USB charger

Carrying method

  • Para-cord lanyard with quick attachment clip
  • Heavy duty nylon holster (kit only)

Waterproof

  • IPX-8 standard

Replaceable items

  • Lens

Reflector

  • Smooth aluminum reflector

Material

  • HAIII hard anodization aerospace aluminum

LED

  • CREE XHP35 HD E4 Cool White LED
  • CREE XHP35 HI E2 Cool White LED
  • CREE XHP35 HI Neutral White LED

Max output

  • CREE XHP35 HD E4 Cool White LED
    • LED lumen: 2000
    • ANSI FL-14 lumen: 1603
  • CREE XHP35 HI E2 Cool White LED
    • LED lumen: 1870
    • ANSI FL-14 lumen: 1410

Beam Profile

CREE XHP35 HD E4 Cool White LED

  • Center lux: 21,200 lux
  • Center spot angle: x°
  • Spill light angle: x°
  • Beam distance: 317 yards / 291 meters
CREE XHP35 HI E2 Cool White LED

  • Center lux: 37,100 lux
  • Center spot angle: x°
  • Spill light angle: x°
  • Beam distance: 420 yards / 385 meters

Lens

  • Waterwhite glass lens w/ harden treatment
  • Anti-reflective (AR) coating on both side (96% transparency)

LED circuit

  • W1900 Pro - XHP35
    • Offer current regulated MAX output with a single li-ion battery down to 3.0V (underload)
    • MAX output slowly reduces after 3.0V and operates until 2.65V (underload)
    • Built-in shut down voltage at 2.65V (underload) to prevent over-discharge for unprotected li-ion battery (user may restart at lower levels)
    • Active thermal management feature (adjustment range 75%-100%)5
    • Synchronous boost controller with ultra low resistance mosfet which offers up to 95% efficiency
    • High switching frequency convertor for more compact circuitry design
    • Non-dimming constant current regulation for all output levels without flicking
    • Zero standby current

Charging circuit

  • L950 Type-C
    • 5V USB input (requires 1A or higher)
    • 950mA MAX charging current
    • Uses the latest standard type-c usb charging plug, supports bi-direction insert
    • Constant current / Constant voltage charging logarithm
    • Small current charging for low voltage battery (less than 3.0V)
    • Extends battery cycle life by charging battery that reads 4.05V or lower
    • Precise voltage detection design +/- 1%
    • No trickle charge
    • Smart charging level report system

Charging level report (charging)

  • Flashlight will flash one time to report the estimated remaining charging time by reading the battery voltage (at five seconds after plugged-in)
    • Flash once: > 2 hours
    • Flash twice: 1-2 hours
    • Flash 3 times: < 1 hour

Output and Runtime

  • Five brightness levels
    • Led lumen:
      • XHP35 HD E4:
        20005-1430/434/43
      • XHP35 HI E2:
        18705-1330/403/40
    • ANSI FL-1 lumen:
      • XHP35 HD E4:
        16035-1204/365/35
      • XHP35 HI E2:
        14105-1039/312/31
    • Runtime:
    • 1-1.3/5.7/70 hrs (1x18650 3500mAh) 0.8-1/4.3/52 hrs (1x18650 2600mAh)
      0.5-0.7/3/40 hrs (2xCR123A)
      2-2.6/12/150 hrs (2x18650) 6
  • Optional disorienting strobe output

Operations

Basic operations:
  • Turn on the flashlight by pressing the tailcap button until it clicks.
  • Twist the head to select between three output levels.
  • You can pre-selected any output level before turning on the light.
Advanced:
  • Tail strobe feature (off by default): Switch to 1st level and turn the flashlight on and off 20 times (one second or less between each click) to toggle this feature. With the tailcap strobe setting enabled, a double press of the switch button (within one second) will activate the strobe output.
Battery charging:
  • Remove the waterproof cover and insert the included type-c charging cable to charge the battery. User must turn on the flashlight switch at the tailcap to charge.
  • Flashlight will switch off the LED output during charge until the charging is completed. Restart the flashlight or switch to other brightness level to wake the flashlight with cable removed.)
  • To check the charging progress anytime during charge, turn the head of the flashlight to wake the charging level report.
  • Maximum charging time for a depleted battery: 2.5-3 hrs (2600mAH 18650 li-ion), 3.5-4 hrs (3500mAh 18650 li-ion)

Controls

Other features

  • LED direct soldering on copper for maximum heatsink ability
  • User replaceable glass lens
  • Battery reverse polarity protection
  • Ultra low internal resistance phosphor bronze springs (silver coated)
  • Spring loaded positive and negative terminal
  • One piece head design for maximum heat transfer
  • Tailcap battery stabilizer design to prevent battery movement inside the battery tube

Warranty

Battery Safety Precaution

Ensure the protection circuit on the 18650 battery to have current trip of 8A or higher (EAGTAC 18650 2600mAh and 3500mAh (Sanyo GA cells) with protection PCB built-in at anode both have 8A trip current). Always use proven EAGTAC batteries for best performance and reliability. Safe chemistry IMR 18650 li-ion are also supported, however use it with precaution as they are unprotected.

All EAGTAC flashlights are designed to use button-top battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only EAGTAC li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight.

Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.

NiMH rechargeable battery may release gas during discharge. If you experience an inflated switch boot or find high pressure being built inside the flashlight, switch off the flashlight immediately. Slowly loosen the tail-cap to reduce the internal pressure and replace all batteries.     Back to top

Flashlight Maintenance

Periodically clean the threads and o-rings with a lint free cloth and apply a thin coating of EAGTAC synthetic grease to the o-rings and threads. After prolonged exposure to moisture, the head and batteries should be removed, inspected, and dried. Do not touch or attempt to clean the reflector, as it will scratch the reflective coating permanently.     Back to top

  1. This weight measurement is based on the Kit model excluding batteries
  2. All batteries must have protruding top button. Protected li-ion battery with 2.5V low voltage cut-off setting is recommended. Using li-ion battery with higher cut-off value (e.g. 3V) may cause the LED to blink when the battery is almost drained due to battery restarting itself. This is normal.
  3. Beam output diameter taken at one meter
  4. ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight measured in a calibrated integrated sphere. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel.
  5. After 60 seconds at maximum output level (100%), the active thermal management feature will be activated and continuously adjusts the maximum output level according to the flashlight internal tempearture. The C3800 adjustment output range is between 80% to 100% (72%-100% for W1900). This feature maintains the flashlight surface temperature to be about 130°F (54 °C) for C3800 or 140°F (60 °C) for W1900 (higher surrounding temperaturemay result in higher flashlight temperature). It's normal for high power flashlight to run hot at MAX level. Reduce the output if the user finds the flashlight too warm to hold.
  6. Runtime is measured using one EAGTAC 3500mAh high discharge 18650 li-ion batteries. MAX level runtime includes out-of-current regulation time period when battery is almost depleted. With active thermal management feature, runtime in cooler environment will have shorter runtime (higher MAX output) and long runtime in hotter environment (lower MAX output).